|
Vertical Stabilizer
Spar reinforcement plate machine countersunk where it will fit against fuselage
Pinned together
Cleco together and match drilled
Cleco and match drill the Rudder stops. NOTE PAY PARTICULAR ATTENTION HERE AS TO HOW THE STOP ATTACHMENT IS FASTENED TO THE HINGE. WHEN IT CAME TIME TO ATTACH THE RUDDER AND CHECK TRAVEL I HAD ATTACHED ONE OF THE STOPS INCORRECTLY AND IT CAUGHT ON THE RUDDER SKIN. NOTICE THERE ARE THREE HOLES AND THEY WILL LINE THE STOP UP IN DIFFERENT POSITIONS. I HAD TO DRILL OUT THE HINGES AND STOP RIVETS AND RE-INSTALL THEM AGAIN CHECK OUT PICTURE WHEN I CHECKED THE RUDDER TO SEE IT
|
