|
MIKE HOWE'S RV7
CONSTRUCTION RUDDER Rudder Page 1 Rudder Page 2 Rudder Page 4 Rudder Page 5 Rudder Page 6
|
|
|
December 4, 2001 Cleco the 405PD, R-404 Rib,R-606PP and the reinforcement plate together and rivet. See PDF enlargement for detail of rivets
|
|
|
Cleco the 405PD, R-404 Rib,R-606PP and the reinforcement plate together and rivet. The three on the other side of the rib not shown are AN470AD4-5 |
|
|
December 4, 2001 Cleco and rivet the R-607 plate to the Spar using the rivets shown in the PDF enlargement
|
|
|
Rivet R-607 to the spar |
|
December 4, 2001 Cleco and rivet the R-608 to the spar using the rivets shown in the PDF enlargement |
|
|
Cleco and rivet the R-608 to the spar |
|
|
December 5, 2001 Put the counter weight inside the R-803 and drill holes through the R-803 so that the AN509-10R16 screws fit through. Then remove the weight and proceed to riveting the R-803 to the R-802 Spar. For the first time my efforts to put everything in an ACCESS database payed off, as I could not find the screws in the bins, ran a query on the subkits, and up came the number and located them immediately.
|
|
|
Drill Counter weight |
|
|
|
