Control Cables Section FF3 and Firewall
Prop Governor Attachment (Hardware not yet tightened)
Mixture Cable
Throttle Cable (No Attached yet so we can adjust cable length to the throttle quadrant).
Fire wall engine side
These are some nice Stainless steel penetrations from www.planeinnovations.com
EFIS wire firewall penetrations
Another aftermarket product we elected to use, also from Plane Innovations were stainless steel heater boxes to replace Van's aluminum boxes
Lightspeed Electronic Ignition Box mounted on the back of the firewall
Back of firewall fitting for the manifold pressure line from engine to transducer for the EFIS. We found some great line to fitting attachments at www.SafeAir1.com. They are for pitot and static line to fitting attachment, just push the tube into the fitting and it locks very nicely. You can release it just by pushing it in like an air hose attachment. We used one here to